Manage cookie consent

445 rue du Noyer des Bouttières 76800 Saint-Etienne-du-Rouvray, France
Logo-cepic-English
back

Graphite blocks horizontal heat exchangers type EH

exchangers-eh

Hydrochloric acid heater (HCL)
Type EH 70 200

Construction

Carbonite® cylindrical block heat exchangers.

Horizontal mounting.

Service enclosure in steel or specific metallurgy.
Design and construction in accordance with PED (97/23/CE).

Main Options

Cable gland construction or expansion compensator.
Internal anti-corrosion coating of the service envelope.
Exterior insulation of the envelope.
Construction for use in ATEX zone.

New graphite cylindrical blocks

Available in NEH (standard drilling) or NXEH (dense drilling) versions.

NEH D and NXEH D versions, in double drilling, of identical design and external dimensions, provide, at a minimum, by doubling the Process drilling, a "Process area/Service area" ratio roughly equal to two.

 

 

APPLICATIONS

back

Graphite blocks horizontal heat exchangers type EH

Construction

Carbonite® cylindrical block heat exchangers.

Horizontal mounting.

Service enclosure in steel or specific metallurgy.
Design and construction in accordance with PED (97/23/CE).

Main Options

Cable gland construction or expansion compensator.
Internal anti-corrosion coating of the service envelope.
Exterior insulation of the envelope.
Construction for use in ATEX zone.

New graphite cylindrical blocks

Available in NEH (standard drilling) or NXEH (dense drilling) versions.

NEH D and NXEH D versions, in double drilling, of identical design and external dimensions, provide, at a minimum, by doubling the Process drilling, a "Process area/Service area" ratio roughly equal to two.

 

 
See more
exchangers-eh

Hydrochloric acid heater (HCL)
Type EH 70 200

APPLICATIONS

Contact

CEPIC SAS France

Sales department

  • 445 rue du Noyer des Bouttières - 76800 Saint-Etienne-du-Rouvray France
  • +33 232 82 37 82
Call us
Send us a message

Uses

  • Cooler with liquid
  • Heater with steam
  • Heater with liquid

Abilities

  • Maximum operating pressure: 15 bar g.
  • Maximum process pressure: 10 bar g.
  • Maximum service temperature: 170°C
  • Number of blocks: 1
  • Product passage diameter: from 8 to 20 mm

Avantages

  • Robustness of Carbonite© blocks
  • Small vertical footprint
  • Unique block therefore limited number of joints
  • Multi-pass possible
  • Natural draining of condensates on the service side

Download

Download the complete file in PDF

NEW GRAPHITE CYLINDRAL BLOCKS

VERTICAL AND HORIZONTAL

NEH and NXEH Version

Available in NEH (standard drilling) or NXEH (dense drilling) versions, impregnated with phenolic resin, these new optimized cylindrical blocks constitute, by stacking, the heart of our new range of heat exchangers.

These graphite blocks of 600mm long, or 300mm long or 200mm long, associable between them, allow adaptability and perfect match to the closest need of our customers. With an external Ø of 225 to 900mm, with drilling 10/8, 10/10, 10/13, 16/8, 16/10 and 16/13, they offer a Process heat exchange area ranging from a minimum of 0.36m2 to a maximum of 27.15m2 per block.

 

NEH D and NXEH D Version

NEH D and NXEH D versions, in 16/8 or 16/10 drilling, of identical design and external dimensions, provide at least, by doubling of the Process drilling, a "Process area / Service area" ratio roughly equal to two. The Process exchange areas are, in this configuration, from 0.5m2 minimum to 35m2 maximum.

 

 

NEH and NXEH Version

Available in NEH (standard drilling) or NXEH (dense drilling) versions, impregnated with phenolic resin, these new optimized cylindrical blocks constitute, by stacking, the heart of our new range of heat exchangers.

These graphite blocks of 600mm long, or 300mm long or 200mm long, associable between them, allow adaptability and perfect match to the closest need of our customers. With an external Ø of 225 to 900mm, with drilling 10/8, 10/10, 10/13, 16/8, 16/10 and 16/13, they offer a Process heat exchange area ranging from a minimum of 0.36m2 to a maximum of 27.15m2 per block.

 

NEH D and NXEH D Version

NEH D and NXEH D versions, in 16/8 or 16/10 drilling, of identical design and external dimensions, provide at least, by doubling of the Process drilling, a "Process area / Service area" ratio roughly equal to two. The Process exchange areas are, in this configuration, from 0.5m2 minimum to 35m2 maximum.

APPLICATIONS

Contact

CEPIC SAS France

Sales Department

  • 445 rue du Noyer des Bouttières - 76800 Saint-Etienne-du-Rouvray France
  • +33 232 82 37 82
Call us
Send us a message

NEH

  • MultiBlock
  • Cylindrical
  • Length (mm)
    600 - 300 - 200
  • Section Ø (mm)
    225 à 900
  • Seal between block
    PTFE BAND
  • Ø Standard Drilling (mm)
    10/8-10-13 ; 16/8-10-13
  • Drilling profile
    Simple
  • Exchange area Process min/Max / bloc (m2)
    0,46 / 20,7
  • Heat exchanger area min/Max
    0,46 / 186
  • Maximun temperature(°C)
    165 à 180
  • Calculation Pressure / Test Pressure
    6 / 9
  • Connections
    ISO PN10 Standard - Other on request
  • Standard Paint
    Hydro phosphatant painting -Primary - Anticorrosion finish - Mono component - Dry film 40 to 80μm
  • DESP 2014/68/UE

NXEH

  • MultiBlock
  • Cylindrical
  • Length (mm)
    600 - 300 - 200
  • Section Ø (mm)
    225 à 900
  • Seal between block
    PTFE BAND
  • Ø Standard Drilling (mm)
    10/8-10-13 ; 16/8-10-13
  • Drilling profile
    Simple
  • Exchange area Process min/Max / bloc (m2)
    0,59 / 24,26
  • Heat exchanger area min/Max
    0,59 / 218
  • Maximun temperature(°C)
    165 à 180
  • Calculation Pressure / Test Pressure
    6 / 9
  • Connections
    ISO PN10 Standard - Other on request
  • Standard Paint
    Hydro phosphatant painting -Primary - Anticorrosion finish - Mono component - Dry film 40 to 80μm
  • DESP 2014/68/UE

NEH D

  • MultiBlock
  • Cylindrical
  • Length (mm)
    600 - 300 - 200
  • Section Ø (mm)
    225 à 900
  • Seal between block
    PTFE BAND
  • Ø Standard Drilling (mm)
    16/8-10
  • Drilling profile
    Double
  • Exchange area Process min/Max / bloc (m2)
    0,51 / 29,8
  • Heat exchanger area min/Max
    0,51 / 273
  • Maximun temperature(°C)
    165 à 180
  • Calculation Pressure / Test Pressure
    4 / 6
  • Connections
    ISO PN10 Standard - Other on request
  • Standard Paint
    Hydro phosphatant painting -Primary - Anticorrosion finish - Mono component - Dry film 40 to 80μm
  • DESP 2014/68/UE

NXEH D

  • MultiBlock
  • Cylindrical
  • Length (mm)
    600 - 300 - 200
  • Section Ø (mm)
    225 à 900
  • Seal between block
    PTFE BAND
  • Ø Standard Drilling (mm)
    16/8-10
  • Drilling profile
    Double
  • Exchange area Process min/Max / bloc (m2)
    0,59 / 35,3
  • Heat exchanger area min/Max
    0,59 / 317
  • Maximun temperature(°C)
    165 à 180
  • Calculation Pressure / Test Pressure
    6 / 9
  • Connections
    ISO PN10 Standard - Other on request
  • Standard Paint
    Hydro phosphatant painting -Primary - Anticorrosion finish - Mono component - Dry film 40 to 80μm
  • DESP 2014/68/UE
CEPIC

CEPIC

Our areas of application

Our equipment is used by leaders in the chemical, metallurgical, mining, water treatment, food industries, etc.

CEPIC

News

See all news

Contact us

Our team will respond to you as soon as possible